Mid-Coat manufacturers

  • $88.00
  • Listed: October 19, 2018 7:22 am
  • Share ad:
  • State: Arkansas
  • Country: Algeria

    Description

    High Build Primer Upol Etch Primer Automotive Primer RC-D400
    1K Primer RC-D400
    RC-D400 is fast drying, one pack surfacer.
    PHYSICAL PROPERTIES
    Specific Gravity1.2-1.3KG/L
    Viscosity1100-1200S
    IngredientsAlkyd resin, nitro-cellulose, pigments,fillers
    ColourGrey putty
    PROCESS
    Mix Ratio (by volume)1K surfacer RC-D400: 1 part Thinner (RC-X111): 1 part
    Pot Life48 hours@20℃
    Spray Gun & Air PressureGravity type: 1.2~1.5mm, 4Pa Suction type: 1.4~1.6m, ( Spray 25μm)
    Spray Method2 single coating with wet spray (volatilization time of each layer:5 to 10 minutes)
    Drying Time30 minutes@20℃, 15 minutes@60℃
    SandingBefore spray: P280~P360 by dry sanding After spray: P800~P1000 by wet sanding, P360~P400 by dry sanding
    SubstrateOEM paints, steel, putty, eroded primer, alloy primer
    Unapplicable SubstrateGalvanized steel, stainless steel, aluminum, wood
    Packaging3.6 KG x 4 tins/ctn
    Shelf Life1 years
    PRECAUTIONS
    1.It cannot be used until stirring evenly after open the tin.
    2.All Roch® automotive refinish can be knifed on the surfacer.
    3.Maximum adhesive force and anti corrosion performance can be available with Roch® two pack middle coating.
    Fast drying will be affected if knife too much.
    2K Primer Surfacer RC-D480 (Grey)
    2K primer surfacer is a fast drying, high build, good adhesion primer. They are suitable for new vehicle parts and repair.
    PHYSICAL PROPERTIES
    Specific Gravity1.40±0.05KG/L
    Viscosity150-180S
    IngredientsHydroxy acrlic resign, pigments, fillers,organic solvents
    ColourGrey
    PROCESS
    Mix Ratio (by volume)2K Primer Surfacer (RC-D480): 4 parts Hardener(RC-G270): 1 part Thinner(RC-X110,RC-X111,RC-X112): 1 part *Choose the materials according to the temperature
    Pot Life2 hours@20℃
    Spray Gun & Air PressureGravity type: 1.2~1.5mm, 4Pa Suction type: 1.4~1.6mm, (Spray 30-50 μm)
    Spray Method2-3 single coating to coverage (volatilization time of each layer:5 to 10 minutes)
    Drying Time3 hours@20℃,30 minutes@60℃
    SandingBefore spray: P180~P400 by dry sanding After spray: P800~P1000 by wet sanding
    SubstrateOEM paint,steel surface,Fiber Reinforced Plastics,surface of putty
    Unapplicable Substrategalvanized steel, stainless steel
    Packaging4 KG x 4 tins/ctn
    Shelf Life5 years
    PRECAUTIONS
    1.2K primer surfacer can be sprayed after sanding and removing the oil and stain on the surface of the putty, epoxy primer, old paints.
    2.30μm must be kept after sanding on the intermediate coating layer.Mid-Coat manufacturers
    website:http://www.jinweipaint.com/undercoat/
    Listing ID: 3695bc9862320a52
    • No Tags

    13 total views, 1 today

    Sponsored Links