|Industrial Cartridge Heater for Plastic Mold Φ6mm&8mm Length from 30px to 10000px
Insulation Material: High-purity Mgo
Resistant wire element: Ni-Cr or FeCr
Lead Connection Option: Crimped or Swaged leads
Lead and type of connection leads, 10″ Fiberglass Standard(Wire options: Teflon, silicone high temperature frber glass)
cartridge can be devided into
1) High power density (heat area surface power 10~25w/cm2)
Working temperature≤450 degrees.
2) middle, low power density (heat area surface power 5~11/cm2)
working temperature≤ 300 degrees
Votage:12~250V (or as requirement)
High Density Construction
High-quality stainless steel construction provides long-lasting protection even in the most rugged industrial environments
Protected with a stainless steel sheath, their watt density can reach 50 W/cm2 and their operating temperature can go up to 800°C
The main characteristic are safety performance and constant temperature. PTC heating is a new kind heater in the market .It is fixied by a pair of metal electrodes with leads on both sides of PTC element.Ours copper imported from Japan. Harnesses are made of Teflon materials weaving wire, terminals installed firmly, to ensure that the wiring harness in good condition .
Operating temperature range ºC : 50 ~ 300 ºC
Rated voltage: 1 ~ 600v
Surface temperature ºC: 45 ~ 300
Surface temperature tolerance ºC: ±5
Normal temperature resistance: Ω0.5~9000
Working lifespan: 50,000hrs
1.PTC heater cost savings, long life.
2.PTC heater safety, environmental protection.
Design of the heating temperature of the heater body at 260 degrees Celsius, under any circumstances use will not produce “red”, “burning” phenomenon, which cause burns, fire and other safety hazards.
3.PTC ceramic heaters save energy.
ptc heater and conventional heaters in the case of the same power, their power consumption is the same, but because of ptc electric energy into heat energy efficient than traditional heaters, the heat generated by the more, whereas in the production of heat under the same circumstances, the conventional heater energy consumption to be more than the power consumed by the PTC heater, PTC ceramic heater is saving energy.
4. When the power stable, it will give out the constant temperature continuous Keep steady power,It can control the temperature by itself,Used in large range of voltage from 12V to 380V,Dimension is nimble various.
PTCheating element are widely used for air conditioning, air curtain, ptc heaters, dryers, hand dryer, drying room equipment, large industrial air duct heating, electric locomotives warm, heating control cabinet, moisture, and other fields.
Welcome to buy the high density cartridge heaters with standard fiberglass insulated wire leads with our factory. We’re one of the leading China manufacturers and suppliers in this field, offering you the best after-sale service and fast delivery. Please be free to get the free sample from us.China Tubular Heating Element manufacturers